- Your International Solution Partner
- Merkez Tel: +90 212 324 48 44
- Perpa Tel: +90 212 220 22 33
- satis@mskglobal.net
What is the difference of Online and Offline (Line) UPS?
What are the Types of Fiber Optic Connectors?
September 19, 2019
What are the software and hardware required for companies for Home Working Systems?
March 13, 2020
UPS stands for "uninterruptible power supply". In other words, it has been transferred to our language as an uninterruptible power supply. However, the word UPS is also used in the product market as a discourse.
UPSs are divided into online and offline. However, because of the word "off", these upsets were called "line ups". We will continue our article as off-line ups. Line UPSs are usually used for the purpose of completing and closing the controlled processes after the power failure of the electronic devices such as modems, computers etc. that operate with small loads. Line ups are preferred because uninterruptible power supplies are cheap. However, we will address some of the issues that are known or misled.
Line Interactive Upsler starts from 650 va and sells up to 3000 va. We can think of these ups as battery storage. It provides 220volt of electricity to the devices that UPS power can lift and enables it to operate for a certain period of time. It doesn't act like a regulator because it doesn't make any regulation, in fact you have no protection against high or low current when the electricity comes from the mains.
Power factors, that is, Power factors PF, are around 0.6 - 0.5, which may actually be below your expectations.
For example; With a 1000va ups you can get a load of only 600watts or 500watts.
However, the cheapest online ups are sold as P.F = 0.7 and you can feed 700watt load.
In short, line interactive ups should not be preferred in critical devices and networks where the electrical voltage is not balanced.
UPSs are divided into online and offline. However, because of the word "off", these upsets were called "line ups". We will continue our article as off-line ups. Line UPSs are usually used for the purpose of completing and closing the controlled processes after the power failure of the electronic devices such as modems, computers etc. that operate with small loads. Line ups are preferred because uninterruptible power supplies are cheap. However, we will address some of the issues that are known or misled.
Line Interactive Upsler starts from 650 va and sells up to 3000 va. We can think of these ups as battery storage. It provides 220volt of electricity to the devices that UPS power can lift and enables it to operate for a certain period of time. It doesn't act like a regulator because it doesn't make any regulation, in fact you have no protection against high or low current when the electricity comes from the mains.
Power factors, that is, Power factors PF, are around 0.6 - 0.5, which may actually be below your expectations.
For example; With a 1000va ups you can get a load of only 600watts or 500watts.
However, the cheapest online ups are sold as P.F = 0.7 and you can feed 700watt load.
In short, line interactive ups should not be preferred in critical devices and networks where the electrical voltage is not balanced.
It is written online or on-line and is the most widely used uninterruptible power supply types on the market. We have explained that the biggest difference of online UPS from offline is electricity regulation. So online ups to give you 220Volt electricity, low or high voltage from the full sine wave does not come from 220volt regulates the electrical voltage. In this way, it prevents the deterioration of your electrical devices and extends the life of the device.
In addition, as explained in the example above, the most important quality is determined by the power factor. The PF or power factor value you see in the UPS specifications section determines the quality of the ups. It can increase from 0.7 power factor to 0.9 power factor.
For example: When you buy 1KVA Spower Barracuda Online Ups, you can feed an electronic device up to 1 KVA = 1000VA X0.9 (P.F.) = 900Watt because it has a power factor of 0.9.
In addition, the amount of battery in the UPS, the date of the battery, the amperage of the battery and the weight of the battery are important.
If you prefer online ups, you will prefer ups that are resistant to low and high currents, feeding your system smoothly and extending its life. Spower Online UPS is sold as 1 KVA, 3 KVA, 6 KVA, 10 KVA, 15 KVA and 20 KVA single phase input single phase output. We recommend you to use SPOWER which is MSK Global brand in your UPS preference.
In addition, as explained in the example above, the most important quality is determined by the power factor. The PF or power factor value you see in the UPS specifications section determines the quality of the ups. It can increase from 0.7 power factor to 0.9 power factor.
For example: When you buy 1KVA Spower Barracuda Online Ups, you can feed an electronic device up to 1 KVA = 1000VA X0.9 (P.F.) = 900Watt because it has a power factor of 0.9.
In addition, the amount of battery in the UPS, the date of the battery, the amperage of the battery and the weight of the battery are important.
If you prefer online ups, you will prefer ups that are resistant to low and high currents, feeding your system smoothly and extending its life. Spower Online UPS is sold as 1 KVA, 3 KVA, 6 KVA, 10 KVA, 15 KVA and 20 KVA single phase input single phase output. We recommend you to use SPOWER which is MSK Global brand in your UPS preference.
